China Manufacturer for Fep Film - FEP Resin (DS610) for wire insulation layer, tubes, film and automotive cable – Huaxia Shenzhou
China Manufacturer for Fep Film - FEP Resin (DS610) for wire insulation layer, tubes, film and automotive cable – Huaxia Shenzhou Detail:
FEP DS610 Series are the melt-processible copolymer of tetrafluoroethylene and hexafluoropropylene without additives that meets the requirements of ASTM D 2116. FEP DS610 Series have good thermal stability, outstanding chemical inertness, good electrical insulation, non-aging characteristics, exceptional dielectric properties, low flammability, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption and excellent weather resistance.
Conformable with Q/0321DYS003
Technical Indexs
| Item | Unit | 610A | 610B | Test Method/Standards |
| Appearance | / | Translucent particle,with impurities such as metal debris and sand,containing visible black particles percentage point less than 1% | HG/T 2904 | |
| Melting Index | g/10min | 5.1-8.0 | 8.1-12.0 | ASTM D2116 |
| Tensile Strength,≥ | MPa | 22 | ASTM D638 | |
| Elongation at break,≥ | % | 310 | ASTM D638 | |
| Relative Gravity | / | 2.12-2.17 | ASTM 792 | |
| Melting Point | ℃ | 265±10 | ASTM D4591 | |
| Dielectric Constant(106Hz),≤ | / | 2.15 | ASTM D1531 | |
| Dissipation Factor(106Hz),≤ | / | 7.0×10-4 | ASTM D1531 | |
| Heat Stress Cracking Resistance | / | / | HG/T 2904 | |
| MIT≥ | cycles | / | ASTM/D2176 | |
Application
Extrusion processed for generic type resin, mainly used for wire insulation layer, tubes, film and automotive cable.
Attention
The processing temperature should not exceed 420℃, to prevent toxic gas from releasing.
Package, Transportation and Storage
1.Packed in plastic bag of 25kgs net each.
2.Stored in clean, cool and dry places,to avoid contamination from foreign substances such as dust and moisture.
3.Nontoxic, noninflammable, inexplosive, no corrosion, the product is transported according to non-dangerous product.
Product detail pictures:
Related Product Guide:
Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for China Manufacturer for Fep Film - FEP Resin (DS610) for wire insulation layer, tubes, film and automotive cable – Huaxia Shenzhou , The product will supply to all over the world, such as: Armenia, Costa Rica, Cyprus, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.
By Ivy from USA - 2018.12.10 19:03
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Elma from Lithuania - 2018.05.13 17:00
